Miele F11 Error Code - Drain Pump Issue
Miele dishwasher error code troubleshooting guide
What This Error Means
The Miele F11 error code indicates a problem with the drainage system. This could be a blocked drain hose, clogged filter, or a malfunctioning drain pump. Water may remain in the bottom of the dishwasher at the end of the cycle.
Possible Causes
- Clogged drain filter
- Blocked drain hose
- Drain pump failure
- Air gap or garbage disposal blockage
- Pump impeller jammed
Troubleshooting Steps
Try these steps before calling for professional service:
- 1Check and clean the drain filter at the bottom of the tub
- 2Inspect the drain hose for kinks
- 3Run garbage disposal if connected
- 4Check air gap if installed
- 5Run a rinse cycle to test
Often a DIY Fix
This error can often be resolved with the troubleshooting steps above. If the problem persists after trying these steps, professional service may be needed.
Parts Commonly Required
- Drain pump
- Drain hose
- Filter assembly
We stock genuine Miele parts for faster repairs. Our technicians carry common parts on their service vehicles.
Related Searches
Pro Tip
Always note the exact error code and any symptoms before calling for service. Take photos of the display if possible. This helps our technicians prepare and bring the right parts on the first visit.
More Miele Resources
Error Code Not Clearing?
Our expert technicians can diagnose and repair any luxury appliance error.